Deep Cleaning & Polishing
Mendabath UK offers a deep clean and polish for baths and shower trays in homes across the UK whose surface is dulled by limescale rather than worn through.
A fresher, shinier bath without a full resurfacing
Many baths become coated in dirt and limescale over a number of years, even with regular cleaning. This can cause light roughness and discolouration. If this is the case and the surface is still in good condition we offer a full clean and mechanical polish to restore the smoothness and shine.
This type of wear is very different to that where the acrylic or enamel surface has actually degraded and become rough and porous, and is thus ready to be resurfaced. Dull baths such as those described can sometimes benefit from a deep cleaning and polish to remove the build-up of dirt and limescale. The process will get rid of stubborn stains and water marks, leaving the bath in a fresher, shinier condition.
The suitability of this service will be determined at survey, as the bath needs to be otherwise in good condition and not showing signs of enamel deterioration to be suitable for deep clean and polishing.
What is included
- Full cleanRemoval of dirt and limescale build-up from the surface.
- Mechanical polishA mechanical polish to restore smoothness and shine.
- Stain and water mark removalStubborn stains and water marks are treated.
- Assessment of the surfaceWe check at survey whether the bath is suitable or needs resurfacing.
- Specialist adviceAdvice on cleaning products, as many agents on the market damage the enamel coat.
What to plan before you book
Check the surface
Run a hand over the bath. If it feels rough or porous, rather than just dull, it may need resurfacing instead.
Photograph the bath
Photos in good light show us the staining and the condition of the surface.
Stop using harsh cleaners
Many cleaning agents available actually have a detrimental effect on the enamel coat, so call us for advice if you are not sure.
Clear the bath and room
Remove everything from the bath and surrounding surfaces before we arrive.
Hard water areas
If you live in a high limescale area, expect build-up to return and plan to dry the bath after use.
Good to know
Suitability is decided at survey
Only a bath that is otherwise in good condition suits a deep clean and polish.
It is not a resurfacing
A deep clean restores shine to a sound surface, but it will not repair worn enamel.
Limescale prevention
In high limescale areas or on baths with low spots, dry the bath after use to prevent damage caused by standing water.
Cleaners
Use a soft non-abrasive sponge with warm soapy water, with a small amount of white vinegar in high limescale areas.
Staining
Minor staining can sometimes be removed with a car polish and a microfibre cloth.
How it works
-
Tell us about your bath
Describe the bath and its condition and send photos.
-
Survey
We assess whether a deep clean and polish suits the bath.
-
Quote
We send a quote and our terms and conditions.
-
Clean and polish
The surface is deep cleaned and mechanically polished.
-
Aftercare
You receive advice on keeping the surface clean.
Questions customers ask
What is the difference between deep cleaning and resurfacing?
Deep cleaning removes limescale and grime from a sound surface. Resurfacing is for surfaces that have degraded and become rough and porous.
Will it remove limescale?
Yes, a full clean and mechanical polish removes limescale and grime build-up from baths in otherwise good condition.
How do I know if my bath is suitable?
The suitability is determined at survey. The bath needs to be in good condition with no signs of enamel deterioration.
Can I use shop-bought cleaners?
Many cleaning agents actually have a detrimental effect on the enamel coat, so please call us for specialist advice.
Does it stop limescale coming back?
No. Dry the bath after use in high limescale areas to prevent damage from standing water.
What if my bath is too worn?
Then we will recommend a resurfacing instead.
Related services
Other repairs and finishes we carry out in the home.
-
Bath Resurfacing
Enamel, cast iron, acrylic or fibreglass: we can resurface any bath in situ, backed by a good old fashioned 5 year guarantee.
Bath Resurfacing -
Bath & Basin Chip Repair
We can repair those unsightly chips, scratches and cracks, saving you time and money while bringing a new lease of life to your bath.
Bath & Basin Chip Repair -
Cosmetic Repairs
From minor imperfections to a complete chip-wreck, a cosmetic repair revives a damaged sink, shower tray or bath without replacing it.
Cosmetic Repairs
Ready to talk it through?
Tell us about the fixture and send a few photos, and we will come back with a quote.